QUICK FIX PROJECTORS

Sydney - Melbourne - Perth - Brisbane - Adelaide

Please find below a list of links and downloads designed to help you out of a tricky spot.

Projector Troubleshooter

All of our equipment is tested before it leaves our premises. So if you are having a problem, more likely than not it’s a small issue that can be fixed within seconds. The following is a list of problems commonly experienced by clients which generally can be fixed immediately.

Projected image is the wrong size
1. Try altering the lens.
2. Try moving the unit closer (for a smaller image) or further away (for a bigger image).

Image is fuzzy
1. Try altering the lens.
2. Try projecting onto a different surface.
3. Try a lower resolution on your computer or notebook

Projector will not turn back on immediately after I turn it off
The projector is in standby mode. Wait 10 minutes and try turning it back on.

There is no place to plug the VGA cable into my PC
Unplug the monitor and plug it into the video card.

I have an image on my PC Laptop screen, but not on the projector
On your laptop using a combination of the function key (Fn) (located in the extreme lower left of your keyboard) and one of the following Function keys (at the top of your keyboard) to change which displays your laptop will display an image on.


I have an image on my Macintosh Laptop screen, but not on the projector
Ensure the projector is switched on and connected to the laptop using the cables provided by PC/Mac Rent.

Click on System Preferences > Displays > Click on the ‘Arrange’ Tab



* 20% guarantee subject to availability on comparable product. Offer does not extend to Rent to Keep plans. Competitors quote must be in writing.